4. Interface Installation

As mentioned in the introduction, the interface is the main connection between the program and the user. In fact, everything the user sees on the computer and uses to communicate with the control unit is considered part of the interface in the Radonix program.

If you do not have the correct interface, you can view and download available interface files for different router devices using the link below:

ℹ️

Information
To download available and active interfaces, click here!

Once you’ve downloaded the interface file, double-click it and follow the steps below:

ℹ️

Information
Due to the variety of interfaces, we’ve used x variables in the form x-x-x to represent different versions. This allows users to select the appropriate interface for their specific device. For example, an interface for one of the router devices is shown in Figure 28 (for more information, refer to the “Interfaces” guide). Click here to access it

Once the interface is successfully installed, the software is ready to be launched.
Now, go to the Start Menu in Windows and search for “Radonix”. You will see 3 Radonix icons appear (Table 3 and Figure 32). These are:

Program	Description
Radonix CAM-Pro	The main software for Radonix.
Radonix CAM-Pro Calibrator	Used for axis calibration. For more details, refer to Section 5.
Radonix CAM-Pro Test	Used to test the control unit. For more details, refer to Section 6.

Table (3)

Now, double-click the Radonix CAM-Pro icon to launch the software interface.

ℹ️

To access the full Interface Guide, Click here!

ℹ️