Articles
Setting Sekmesi İncelemesi Now let’s examine the Setting tab of the Settings window. This section contains a tree structure that includes all the main settings of the Radonix controller. Each branch contains different parameters and variables. These parameters and variables receive the necessary links based on their types so that the desired settings can be applied by the user.
General \ DefaultReference When the software starts, this defines which reference will be used by default. For example, if DefaultReference=54 is set, the G54 reference will be used. The last reference saved via the SetReference function is stored in the DefaultReference variable. General \ FeedStep This variable defines the feed step for scrolling. By changing […]
ℹ️ (A: Analog D: Digital) JoyStick / Enabled The Enabled variable can be True or False.If False, the JoyStick is completely disabled and ignored. If True, the JoyStick is active. JoyStick / ExponentialTrigger The ExponentialTrigger variable can be True or False.If False, changes occur linearly. For example, speed rises from 10 to 20 to 30 in a straight line. If True, changes occur exponentially. For example, speed rises from […]
Radonix Remote Control Setup The Radonix remote control is a package designed to operate and control the device from up to 15 meters away. Each remote control kit includes a receiver, a cable, and a transmitter. To set up the remote: Note: Before plugging in the cable, make sure the CDM21XXX USB driver is installed so the receiver […]
Router \ KeepZUp This variable determines how far the Z-axis will move away from its reference point when the machine axes are homing. Router \ SafeZ Normally, when moving axes, the Z-axis first moves to its maximum (highest) position, then after X/Y are positioned, Z moves down to the desired height. With SafeZ, instead of moving […]
+ 4 Articles
Show Remaining Articles