Articles
Calibration Concept According to the National Standard, calibration is the process of comparing a measuring device with a standard, determining the amount of deviation from that standard, and adjusting the calibration if necessary to meet the relevant standards. In other words, calibration refers to the process of aligning the amount of movement of an axis […]
Calibration Methods in the Radonix Controller Due to existing measurement errors and the need for specific environmental conditions, the calculation method is superior to the measurement method in terms of accuracy for proper calibration. However, to apply this method, one must have knowledge of the power transmission components in the system—such as the motor, gearbox, gears, and, if used, […]
In this method, calibration is based on physical measurement using measuring tools and devices. Therefore, the precision of the measuring instruments, measurement accuracy, and the mechanical error of the machine directly affect the quality of the calibration. While this method does not provide the accuracy level of the calculation method, it is widely used because […]
As previously explained, the CAM-Pro Calibrator software is installed alongside the CAM-Pro software. After installation, there are two ways to find the calibration tool: The program consists of two windows. The first window only opens when more than one active interface exists on the PC (Figure 3). In this window, you can select the interface you want to use […]
Steps to Calibrate an Axis To calibrate an axis, follow the steps below: 📘 NoteIf no activation code has been entered, you will receive an error message when opening the CAM-Pro Calibrator software.