Articles
+VCC This pin is the voltage output pin from the control card. It can supply up to 100 mA of current for COM+ power. Direction+ & Direction- These two pins determine the motor’s direction of rotation. The connection type is line drive, capable of supplying up to 25 mA, and can control two motors in […]
Radonix control card axes are referred to as Axis[n], where n indicates the axis number. Passive axes are not allowed between active axes, and the gantry (portal) axis must always be the last axis. The control card’s axes connect to servo motors and step motors via the DB15 connector according to Table 3 and Figure 19. […]